Flair Heat Temperature Strips

Flair Heat Temperature Strips

Brewing at the right temperature, either with your brewing water or with your milk, is critical to optimizing your results.

Purchase our High Heat Temperature Strip, with a range of 158 to 212°F / 70 to 100°C to ensure your brew head is preheated before adding your brew water.

Similarly, you can buy a low heat temperature strip with a range of 25 to 65 °C to ensure that the milk in your frother or steamer has reached the optimal point for latte art.

Take control of your brewing and improve the repeatability of your delicious shots by placing these easy-to-use, easy-to-read temperature strips on your brew heads and steamers!

Comes with one (1) customizable temperature strip. Dimensions are 2.25 x 0.5 inches.

*Before application, make sure the surface is clean and dry. During application, ensure that the strip lies flat over the cylinder or other surface and that there are no gaps or air pockets where water can seep between the surface and the strip.

As the meter warms to the reaction temperature, the window begins with a brown or maroon color and continues to change to green.
The TAN window is above the actual temperature reading
GREEN window is actual temperature reading
BLUE window is below the actual temperature reading
Moisture resistant: self-adhesive backing
Estimated shelf life of adhesive: 2 years, but will vary depending on application and use